ValueRAM KVR13N9S8/4 memory module 4 GB 1 x 4 GB DDR3 1333 MHz

<a href="https://www.ec.kingston.com/ecom/hyperx_us/partsinfo.asp?root=&ktcpartno=KVR13N9S8/4" style="display: block;">https://www.ec.kingston.com/ecom/hyperx_us/partsinfo.asp?root=&ktcpartno=KVR13N9S8/4</a><br><br>This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:<br><br>- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply<br>- VDDQ = 1.5V (1.425V ~ 1.575V)<br>- 667MHz fCK for 1333Mb/sec/pin<br>- 8 independent internal bank<br>- Programmable CAS Latency: 9, 8, 7, 6<br>- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock<br>- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)<br>- 8-bit pre-fetch<br>- Burst Length: 8 (Interleave without any limit, sequential with starting address ΓÇ£000ΓÇ¥ only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]<br>- Bi-directional Differential Data Strobe<br>- Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ┬▒ 1%)<br>- On Die Termination using ODT pin<br>- Average Refresh Period 7.8us at lower than TCASE 85┬░C, 3.9us at 85┬░C < TCASE < 95┬░C<br>- Asynchronous Reset<br>- PCB: Height 0.740ΓÇ¥ (18.75mm) or 1.180ΓÇ¥ (30.00mm)<br><br>

Kingston Technology ValueRAM KVR13N9S8/4. Component for: PC/Server, Internal memory: 4 GB, Memory layout (modules x size): 1 x 4 GB, Internal memory type: DDR3, Memory clock speed: 1333 MHz, Memory form factor: 240-pin DIMM, CAS latency: 9, Product colour: Green